Before You Ask For Repair Services - Luxman D-05 Owner's Manual

SUPER AUDIO CD PLAYER D-05

Before You Ask For Repair Services

While the unit is used, an unusual phenomenon may be confused as a malfunction for a certain reason .
Prior to asking us for repair services, please check the table below and read the instruction manual for the subsid-
iary devices .
If the cause of malfunction cannot be identified, please make queries to the purchasing store .
Problem
Power is not turned on .
The disc tray comes out even
after the tray is closed .
Playback cannot be performed .
Settings have been erased .
The remote control cannot be
operated .
An electronic device such as a
television malfunctions .
49
Cause/Solution
· Connect the power cable to the AC inlet (AC IN) and the
AC outlet firmly .
· Set the disc on the disc tray correctly .·
· Clean the disc to remove dirt .
· Clean the disc to remove dirt .
· Set the disc on the disc tray correctly .
· Remove dew condensation from the interior of this unit .
· Put the disc on the tray with the label facing upwards .
· Settings may be erased when electric power failure
happens or when power supply is shut down due to power
cable disconnection .
Be sure to unplug the power cable after pressing the
OPERATION switch and the "-STANDBY-" disappears
from the display .
· Operate the remote control within the specified operating
range .
· Replace the remote control battery with a new one .
· The remote control infrared receiver is exposed to
direct sunlight or strong light sources (such as inverter
fluorescent lights) .
Change the installation place or angle to avoid the
exposure to light sources.
· Some devices equipped with a wireless remote control
receiver may malfunction when the remote control of this
unit is operated . Keep this unit away from such devices .
Ref. page
22
24
2
2
24
1
46
8
7
8
8