Table of Contents
Advertisement
Seen – Seen A
5.
Press
to validate the number.
6.
Choose a ring tone for the contact you create. Press
Deleting caller list record
1.
Press the ()
2.
Press or key to select a call record.
3.
Press
.
4.
Select "delete " (or " delete all" to delete the entire Caller list).
5.
Press
to confirm.
P
HONEBOOK
You can store 100 phonebook entries (20 digits and 12 characters) in your phonebook
Calling a contact from your phonebook
1.
Press
key to access to the contact list.
2.
Press or to go through the list.
3.
Once the contact to call is chosen, press
Adding a contact to the phonebook
1.
Go to the menu "phonebook" "Add ".
2.
Enter the name of the entry. Press
3.
Enter the number. Press
4.
Choose a ring tone for the file you create. Press
Display a contact
1.
Go to the menu "
2.
Choose the contact to display with the or . Press
3.
Select "view".
4.
The number is displayed. Use keys or to display the name of the ring tone assigned to
that file.
Editing a contact
1.
Go to the menu "
2.
Select the entry you want to edit using or . Press
3.
Select "edit".
4.
You can now use the
5.
Enter the new name and press
6.
You can now use the
7.
Enter the new number and press
8.
Choose a ring tone for the file you create. Press
Deleting a contact / the entire phonebook
1.
Go to the menu "
2.
Select the entry you want to delete using or . Press
3.
Select "delete" (or "delete all " to delete the entire phonebook list).
4.
To confirm the deletion of the entry, Press
or ()
key.
.
.
".
phonebook
".
phonebook
key to delete the entire name or individual characters.
key.
key to delete the entire number or individual digits
key.
".
phonebook
.
.
.
.
.
.
.
.
12
Advertisement
Table of Contents
Need help?
Do you have a question about the Seen and is the answer not in the manual?
Questions and answers
The date and time will not change from 02-04-2016 and time is HR out and will not adjust in the handset settings for date and time
To fix the date and time issue on your SAGEMCOM Seen device:
1. Go to the menu "hs settings" → "Date & time".
To set the time:
2. Select "set time".
3. Enter the correct time in HH:MM (24-hour format).
4. Press the confirmation key.
To set the date:
5. Select "set date".
6. Enter the correct date in DD/MM/YY or MM/DD/YY format.
7. Press the confirmation key.
Use the navigation keys (labeled as 5 or 6) to correct mistakes if needed.
This answer is automatically generated
@Mr. Anderson I have done this repeatedly and it is not working