Voice Mail; Multimedia Message; Browser Sl Message - AT&T PANTECH C3B User Manual

Messaging
•Message Center: Stores or changes the number of
your message center that is required when sending a
message.
•E-mail Gateway: Stores or changes the number of your
e-mail gateway required when sending an e-mail.
•Save to: Sets the text message storage to SIM or phone.
•Message Format: Sets the message type to Normal, Fax,
Voicemail, ERMES, National Paging, X.400, or Internet.
The network converts the messages into the selected
format.
NOTE
The message format depends on the SIM.

Multimedia Message

Press the [Menu] Soft key, select 2. Messaging, select 10.
Settings, select 3 .Multimedia Message, and press the [o]
key.
To set up default Multimedia Message information,
use the following functions:
•Profiles: Sets up multimedia messages profile settings.
•Delivery Reports: When this option is set to [On], the
network informs you whether or not your message has
been delivered successfully.
•Read Reports: When this option is set to [On], the
54
070210_C3B_EN_at&t_(00)�‚�¬.indd 54
recipient's phone sends a reply to let you know when
your message has been read.
•Message Lifetime: Sets the duration of time your
message is stored at the message center while
attempting to deliver it. You can select one of 1 Hour,
2 Hours, 6 Hours, 1 Day, 2 Days, 1 Week, 4 Weeks, 6
Months, or Maximum.
•Note: If you reset the phone, all user settings of the
Profiles will be deleted and returned to factory-default
settings.

Voice Mail

Press the [Menu] Soft key, select 2. Messaging, select 10.
Settings, select 4.Voice Mail, and press the [o] key. This
number is normally pre-populated by your carrier during the
activation process.

Browser SL Message

Press the [Menu] Soft key, select 2. Messaging, select 10.
Settings, select 5.Browser SL Message, and press the [o]
key.
•Receive: Sets up browser message receiving. The (
icon displays when the user receives a new message.
When the user receives an SL (Service Load)
message
)
2007.2.10 12:39:43 PM