AT&T PANTECH C3B User Manual page 48

• Take a Photo: Creates a new photo.
• Photo Album: Already saved photo.
• Downloaded: Downloaded image.
(For further details, see Graphics on page 65.)
• Add Sound: Adds the voice memo or the downloaded
sound. Press the [o] key to select the sub-menu.
• New Voice Memo: Creates a new recording memo.
• Voice Memo: Already recorded sound.
• Downloaded: Downloaded sound.
(For further details, see Audio on page 64 and Voice
Memo on page 69.)
• Add Slide: Adds a new slide.
NOTE
After you add the text, the image or the sound, the Add
Slide menu appears if you press the [Add] Soft key ([]]). To move
to a different slide, press the [l/r] key.
❸ After writing the message, press the [o] key. And then
press the [Options] Soft key ([[]) to use the following
[Editor Options].
• Preview: Shows the message as it appears on the
recipient's phone, and you can return to the Editor to
press the [Editor] soft key ([[]).
• Delete Text/Image/Sound: Deletes the selected text,
070210_C3B_EN_at&t_(00)�‚�¬.indd 47
image, or sound from the slide page.
•Add Objects: Adds an image, sound, and slide objects.
• Save as Draft: Saves messages in the phone memory.
• Delete Slide: Deletes the selected slide.
NOTE
When more than one slide exists, this menu appears.
• Edit Subject: Edits the subject
• Settings: The user can only change the setting for
the message which is in the process of being written
regardless of the global settings. To find those settings,
press [Menu] Soft key select 2. Messaging, select 10.
Settings, and then select 3.Multimedia Message.
• Slide Timing: Sets how long the received message is
displayed. The display automatically scrolls to the next
slide page after the specified time.
• Page Layout: Arranges the image and text display
position in the slide page. You can set Image at Top or
Text at Top.
• Delivery Reports: When this option is set to [On], the
network informs you whether or not your message
has been delivered successfully (This is network
dependent).
• Read Reports: When this option is set to [On], the
Messaging
47
2007.2.10 12:39:39 PM