Using Your Camera Options; The Preview Mode - AT&T PANTECH C3B User Manual

Using your camera options

The Preview mode

Press the [Options] Soft key ([[]) in Preview mode to
select the following information which will be applied to the
image. Its setting value is temporary, so if you want to save
its value, press the [Menu] Soft key, select 1. Camera, and
then select 3. Settings.
• Go to Album: Moves to the Photo Album.
• Image Size: Displays the size of image that you want to
shoot: 128X128 or 640X480.
NOTE
This option does not appear in Frame Capture mode.
• Self Timer: Specifies the delay time. You can choose
None, 5 Secs, or 10 Secs. When the selected time has
lapsed, the camera takes a photo.
• Frame: Specifies the frame to use.
NOTE
This option appears in Frame Capture mode.
• Multi-Shot: Selects the multi-shot number that you want
(4/6/9).
NOTE
This option appears in Multi Capture mode.
• Flash: Turns the flash on or off.
• Effect: Applies one of the following effects to the picture:
070210_C3B_EN_at&t_(00)�‚�¬.indd 41
•Normal
•Sepia
•Solarization
•Monochrome
•Line Drawing
•Negative
•Embossing
NOTE
You cannot set Effect in 640X480 size.
• Display Icons: Turns the display icons On or Off.
The Single or Frame Capture mode
❶ Press the [Options] Soft key ([[]) in Capture mode to
select the following information, which is applied to the
image.
• Delete: Deletes the photo that is saved automatically.
• Set as:
•Wallpaper – Adds a photo to Wallpaper in Display. The photo is
set as the background image of the main screen.
•Address Book– Assigns a specific photo image to Address
Book.
• Back to Preview: Returns to the camera preview screen.
• Send via Bluetooth: Transmits the selected photo via
Bluetooth .
Camera
41
2007.2.10 12:39:37 PM