Troubleshooting - Error Message - Sharp Aquos LC-40D78UN Operation Manual

Hide thumbs Also See for Aquos LC-40D78UN:
Table of Contents

Advertisement

Appendix
Problem
• No picture
• Picture quality of HD programs is
poor.
• The TV sometimes makes a
cracking sound.

Troubleshooting - Error Message

The example of an error message
displayed on a screen
Failed to receive broadcast.
No broadcast now.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: f 4°F to e 140°F ( f 20°C to e 60°C)
• Is connection to other components correct?
• Is the correct input signal type selected in "Input Select" after connection?
Page 24
• Is the correct input selected?
• Is "On" selected in "Audio Only"?
• If the PC image is not displayed, check the following:
- When connecting a laptop PC to the TV, check that display output mode of the
PC is set to external monitor.
- Check the resolution setting on the PC. Is a non-compatible signal being input?
Page 30
• To enjoy HD images from external equipment, you are required to set up HDMI
connection or component connection.
• If the program content is not of HD quality, HD images cannot be displayed. Check
that the program you are viewing provides HD images.
• The HD cable/satellite set-top box may need to be confi gured to output HD images
via cable/satellite.
• The cable/satellite broadcast may not support a signal resolution of 1080p.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.
Check the antenna cable. Check that the antenna is correctly setup.
Check the broadcast time in the program guide.
28
Possible Solution
Page 11
Page 15
Page 24
Possible Solution

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents