Appendix
Troubleshooting - Error Message
The example of an error
message displayed on a
Error code
screen
Failed to receive
E202
broadcast.
No broadcast now.
E203
An incompatible audio
—
signal has been
received. Check the
output device settings.
Possible Solution
Check the antenna cable. Check that the antenna
is correctly setup.
Check the broadcast time in the program guide.
This message is displayed when an audio format
other than PCM, DTS or Dolby Digital is input.
- Set the audio output format of connected
external HDMI equipment to PCM, DTS or Dolby
Digital.
- Refer to the operation manual of the external
equipment for setting details.
ENG 11-9