Troubleshooting - Error Message - Sharp AQUOS LC-40LE830U Operation Manual

Hide thumbs Also See for AQUOS LC-40LE830U:
Table of Contents

Advertisement

Appendix
Problem
No picture
Picture quality of HD programs is
poor.
The TV sometimes makes a
cracking sound.
• The original home page cannot
be displayed.
• Some Internet functions used on a
PC are not available from the TV.

Troubleshooting - Error Message

The example of an error message
displayed on a screen
Failed to receive broadcast.
No broadcast now.
An incompatible audio signal has
been received. Change the output
device audio settings to PCM.
74
Is connection to other components correct?
Is the correct input selected?
Is "On" selected in "Audio Only"?
• If the PC image is not displayed, check the following:
- When connecting a laptop PC to the TV, check that display output mode of the
PC is set to external monitor.
- Check the resolution setting on the PC. Is a non-compatible signal being input?
Page 57
To enjoy HD images from external equipment, you are required to set up HDMI
connection or component connection.
If the program content is not of HD quality, HD images cannot be displayed. Check
that the program you are viewing provides HD images.
The HD cable/satellite set-top box may need to be confi gured to output HD images
via cable/satellite.
The cable/satellite broadcast may not support a signal resolution of 1080p.
This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to change in temperature. This does not affect the TV's performance.
• Is the ETHERNET cable connected correctly?
• Check the settings of "Internet Setup".
• The TV has only limited functions compared with regular PC browsers.
Error code
E202
Check the antenna cable. Check that the antenna is correctly setup.
E203
Check the broadcast time in the program guide.
This message is displayed when an audio format other than PCM
is input. (Dolby Digital and DTS audio formats are not supported.)
- Set the audio output format of connected external HDMI
equipment to PCM.
- Refer to the operation manual of the external equipment for
setting details.
Possible Solution
Pages 13 to 17 and 52
Pages 13 and 22
Page 30
Page 60
Pages 62 to 63
Possible Solution
Page 65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents