Care And Cleaning - Fisher & Paykel CG363ML User Manual

Care and cleaning

14
US
CA
Your CookSurface has been designed to combine the easy-care cleaning of ceramic glass with
the performance of gas.
Important!
Read through the 'Safety and warnings' and 'Care and cleaning' sections carefully before doing any
cleaning or maintenance.
To avoid the risk of electrical shock or burners being accidentally turned on during cleaning, make
sure you turn the CookSurface off before cleaning by pressing the on/off power button.
Remember that the CookSurface will need to be turned back on for the pan supports to rise and
lower. See the specific cleaning instructions on the pages following.
To maintain your CookSurface in good condition, follow the recommendations in the chart
below :
When
Immediately
After every
use
Once every
six months
Once every
year
What to do
Remove sugary spillovers or anything
that melts onto the ceramic glass. See
'Melts and spills that require immediate
attention' for instructions.
Keep the pan supports clean to ensure
that they rise and lower properly during
use. See 'Cleaning the pan supports (the
pan support pins and burner heads)' .
Lower the cooled, clean pan supports
and wipe the CookSurface with a damp,
soft cloth and mild detergent. See
'Cleaning the ceramic glass' for further
instructions and information.
Check that the airflow through the air
filter mesh (on the underside of your
CookSurface) and the air intake grill
(installed in the base of your cabinet)
is not blocked or reduced, eg by
accumulated dust or other dirt.
Clean the mesh and grill with a small
brush if necessary.
Check the gas connection hose for any
sign of abrasion, kinking, or any other
damage.
Important!
Take care not to scratch the
glass or damage the trim
rings or pan support pins.
Take extreme care when
working around hot
surfaces.
Always clean soiled pan
supports before lowering
them.
Do not let spills and stains
become burnt onto the glass
or pan supports.
Do not use abrasive
sponges, heavy-duty or
unsuitable nylon scourers,
or corrosive cleaners such
as oven sprays and stain
removers.
If you are unsure as to
the condition of the gas
connection hose, contact
your Authorized Service
Center or Customer Care.