Fisher & Paykel CG363ML User Manual page 12

Using your CookSurface
10
US
CA
...3 seconds
8b To lower the pan supports automatically after you have finished cooking, press and hold the
dial for three seconds while the burner is lit. The flame will go out and the pan supports, if cool
enough, will lower.
If the supports are hot, the hot warning light will glow and the control display will show a
descending sequence of lights until the burner has cooled. This can take between 30 seconds
and 30 minutes depending on the flame setting and how long the burner had been in use. Once
cool, the pan supports will lower automatically.
To turn the CookSurface off, press the on/off power button. Note: if a burner is still cooling, the
hot warning light will glow. Once cool, the burner will lower automatically and the CookSurface
will turn off.
Keylock
...2 seconds
The keylock stops children from turning on the dials. You can only set the keylock when the
burners are off. To set the keylock, press and hold the on/off power button for two seconds. A
tone will sound and the keylock light will then glow. To turn the keylock off, press and hold the
on/off power button for two seconds, a tone will sound and the keylock light will go out.