Answering system operation
NOTE: To adjust the
voice prompt volume,
press VOLUME
Answering system setup
You can change the number of rings, call
screening status, remote access code and
message alert tone.
To change the answering system setup:
1. Press SETUP repeatedly to hear the settings
for different features.
.
2. When you hear the feature you want to
change, press SKIP or
the setting.
• Number of rings - set the number of rings
• Call screening - turn the call screening at
• Remote access code - change the code
• Message alert tone - set the message
3. Press SETUP to save your selection and move
to the next menu option.
-OR-
Press
and exit the menu.
before the answering system answers an
incoming call.
the base feature on or off.
required to access your answering system
from another telephone.
alert tone to
On
when you have a new answering system
message.
STOP to save your selection
PLAY/
55
REPEAT to change
so that it will beep