Chain Dialing - AT&T TL74458 User Manual

Telephone operation
NOTES:
1. While reviewing the
directory on a call, editing
an entry is not allowed.
For more details about the
directory, see page 34.
2. While reviewing the caller
ID history on a call, storing
the caller ID number in the
directory is not allowed. For
more details about the caller
ID history, see page 43.
3. While on a call, only
the most recently called
number can be reviewed,
and erasing the entry is not
allowed. For more details
about the redial memory,
see page 16.

Chain dialing

This feature allows you to initiate a dialing
sequence from numbers stored in the directory,
caller ID history or redial list while you are on a
call.
This feature is useful when you need to access a
bank account PIN or calling card access number
that is already in the directoy, caller ID history or
redial list.
Directory
Using a cordless handset:
While on a call, you can press DIR to review the
directory. To dial the displayed number, press
SELECT.
MENU/
Using the telephone base:
While on a call, you can press DIR to review the
directory. To dial the displayed number, press
SELECT or DISP DIAL.
MENU/
Caller ID history
Using a cordless handset:
While on a call, you can press CID to review the
caller ID history. To dial the displayed number,
press SELECT.
MENU/
Using the telephone base:
While on a call, you can press CID to review the
caller ID history. To dial the displayed number,
press SELECT or DISP DIAL.
MENU/
Last number redial
Using a cordless handset:
If you are on a call, press REDIAL/
display and dial the most recently dialed
number. If you press REDIAL/
two seconds, the number will not be dialed.
Using the telephone base:
If you are on a call, press REDIAL to display
and dial the most recently dialed number. If you
press REDIAL again within two seconds, the
number will not be dialed.
20
to
PAUSE
again within
PAUSE