14
Network Setup (This Section is for Advanced Users Only)
To enable static IP addressing:
NOTE
•
A static IP address is not required for remote access to the system.
•
You may have to configure your router settings if the DHCP server is enabled.
1. Tap
, then go to General Settings > Network Setup > Advanced Setup.
2. Tap Static IP. A Static IP configuration screen appears.
3. Tap the text box next to the IP Address field. A virtual numeric keypad appears on
screen.
NOTE
•
1: Number Keys
•
2: Backspace
•
3: Confirm entry
4. Tap each value inside the text box to move the cursor.
#LX400069; r.28523/28523; en-US
45