Quad Mode; Auto Sequence Viewing Mode; Digital Zoom - Lorex LW2770 series User Manual

Hide thumbs Also See for LW2770 series:

Table of Contents

Using the System

7.4.1 Quad Mode

In Quad mode you can view up to four cameras simultaneously.

NOTE

If only two cameras are connected to the receiver, half-Quad mode is enabled, that only shows the two

channels being used.

Quad Mode

Auto Sequence Viewing mode cycles through connected channels in full-screen.

To enable Auto Sequence:

• Tap

to switch to Auto Sequence viewing mode. The receiver automatically switches

through connected channels. The SEQ icon indicates the monitor is on Auto sequence

viewing mode.

• Tap anywhere on the screen to return to Quad / Half-Quad viewing mode.

The digital zoom feature allows you to zoom in 2x on a single camera during live viewing.

This is useful if you need a closer look at something happening far away from the camera.

To use digital zoom:

1. Select the desired camera in full-screen mode.

2. A zoom icon (

) appears on the right side of the screen. Tap the zoom icon and tap

anywhere on the screen to zoom into the desired area.

3. Tap

to zoom out.

4. Tap anywhere on the screen to return to Quad / Half-Quad viewing mode.

#LX400069; r.28523/28523; en-US

Half-Quad Mode

Table of Contents

Show Quick Links

Table of Contents