Figure 60. Installing the power supply assembly
12. Reconnect the power supply assembly cables to the system board and each of the drives. See "Parts
on the system board" on page 6.
13. Secure the power supply assembly cables with the cable clips and ties in the chassis.
14. Reinstall the heat sink fan duct. See "Replacing the heat sink and fan assembly" on page 79.
15. Press the release tab
downward until it snaps into position.
Figure 61. Pivoting the drive bay assembly downward
16. Install the optical drive. See "Replacing the optical drive" on page 55.
17. Install the front bezel. See "Replacing the front bezel" on page 54.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 86.
1
on the right side of the drive bay assembly and pivot the drive bay assembly
.
Chapter 7
Installing or replacing hardware
85