Lenovo ThinkCentre M800 User Manual page 73

9. Remove the four screws
drive to remove it from the bracket.
Figure 24. Removing the 2.5-inch storage drive from the bracket
10. Take the new 2.5-inch storage drive out of the static-protective package.
11. Align the two pins in the storage drive bracket with the corresponding holes in the new storage drive.
Then, pivot the storage drive downward until it snaps into position and install the fours screws
secure the storage drive to the bracket.
Figure 25. Installing the 2.5-inch storage drive into the bracket
1 that secure the 2.5-inch storage drive to the bracket. Then, lift up the storage
.
Chapter 7 Installing or replacing hardware
1
to
63