Lenovo ThinkCentre M800 User Manual page 88

Hide thumbs Also See for ThinkCentre M800:
Table of Contents

Advertisement

10. Position the new memory module over the appropriate memory slot. Ensure that the notch
memory module aligns correctly with the slot key
straight down into the slot until the retaining clips close.
Figure 50. Installing a memory module
11. Reinstall the PCI Express x16 graphics card if you have removed it. See "Replacing a PCI Express
card" on page 73.
12. Position the heat sink fan duct on the top of the new heat sink and fan assembly as shown. Then, press
the heat sink fan duct straight down until it snaps into position.
Figure 51. Installing the heat sink fan duct
13. Press the release tab
downward until it snaps into position.
78
ThinkCentre M800 and M900 User Guide
1
on the right side of the drive bay assembly and pivot the drive bay assembly
2
on the system board. Push the memory module
1
on the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkcentre m900

Table of Contents