Appendix C: Supported Dvi Resolutions; Software Upgrade Search Via User Interface; 2) 3.Am Search And Upgrade Mode - Akai ALED3205TBK User Manual

Appendix C: Supported DVI
Resolutions
When connecting devices to your TV's connectors by
using DVI to HDMI cables (not supplied), you can refer
to the following resolution information.
Index Resolution
1 640x400
2
640x480
3 800x600
4
832x624
5 1024x768
6
1152x864
7
1152x870
8 1280x768
9 1280x768
10 1280x960
11 1280x1024
12 1360x768
13 1400x1050
14 1400x1050
15 1400x900
16
1600x1200
17
1680x1050
18
1920x1080
19
480i-480p
20
576i-576p
Frequency
70Hz
60Hz-66Hz-72Hz
-75Hz
56Hz-60Hz-70Hz-
72Hz -75Hz
75 Hz
60Hz-66Hz-70Hz-
72Hz -75Hz
60Hz-70Hz-75Hz
75Hz
60 Hz
75Hz
60Hz-75Hz
60Hz-75Hz
60 Hz
60 Hz
75Hz
65Hz-75Hz
60 Hz
60 Hz
60 Hz
60Hz
50Hz
English - 69 -
Appendix D: Software Upgrade
• Your TV is capable of finding and updating new
software upgrades over broadcast channels.
• For broadcast channels search, the TV looks at the
available channels stored in your settings. So before
the software upgrade search, it is advised to auto
search and update all available channels.
1) Software upgrade search via user
interface
• It is possible to manually to check if there is a new
software upgrade for your TV set.
• Simply navigate on your main menu. Choose
Settings and select Other Settings menu. In Other
Settings menu navigate on to the Software Upgrade
item and press OK button to open Upgrade Options
menu.
• In Upgrade Options menu select Scan for upgrade
and press OK button.
• If a new upgrade is found, it starts to download the
upgrade. A progress bar indicates the remaining
download progress. When the download completes
successfully a message is displayed for reboot to
activate new software. Press OK to continue with
the reboot operation.

2) 3.AM search and upgrade mode

• If Automatic scanning in Upgrade Options menu is
enabled, the TV wakes up at 03:00 and searches
the broadcast channels for new software upgrade. If
new software is found and downloaded successfully,
with the next power up the TV opens with new
software version.
Note on reboot operation: Reboot is the last step
in software upgrade operation if download of new
VRIWZDUH LV ¿QLVKHG VXFFHVVIXOO\ 'XULQJ UHERRW 79
PDNHV ¿QDO LQLWLDOL]DWLRQV ,Q WKH UHERRW VHTXHQFH
panel power is closed and front led indicates the
activity with blinking. Around 5 minutes later TV
restarts with new software activated.
• If your TV fails to restart in 10 minutes, unplug power
for 10 minutes and re-plug again. TV should open
with new software safely. If you still can not get
TV working, please kindly repeat unplug and plug
sequence a few times more. If your set still can not
operate, please call the service personnel to fix the
problem for you.
Caution: While the LED is blinking during reboot do
not unplug your TV's power. Doing this may cause
\RXU 79 QRW WR UHVWDUW DJDLQ DQG FDQ RQO\ EH ¿[HG
by service personnel.