Cleaning And Maintenance; General; After Each Use - Blue Seal GP513 Installation And Operation Manual

Evolution series
Hide thumbs Also See for GP513:
Table of Contents

Advertisement

Cleaning and Maintenance

General

Do not use water jet spray to clean interior or exterior of this appliance.
Clean griddle regularly. A clean appliance looks better, will last longer and will perform better.
Carbonised grease on surface or on griddle plate will hinder transfer of heat from cooking surface to
food. This will result in loss of cooking efficiency.
NOTE: Each Heavy Duty Griddle is supplied with a scraper tool and a pack of blades for cleaning
griddle surface.
B
LADES FITTED TO SCRAPER TOOL ARE EXTREMELY SHARP AND ARE TO BE USED WITH CARE
- 1 Flat Blade (pack) - 1 Ribbed Blade (pack) and 2 handles for Ribbed Heavy Duty Griddle.
- 1 Flat Blade (pack) and I handle for Smooth Heavy Duty Griddle.
NEVER use ribbed scraper blade on flat chrome surfaced griddle plate.
Replacement blades and handles can be purchased separately. Refer to 'Replacement
Parts List' at rear of manual.
DO NOT use water on griddle plate while this item is still hot as warping and cracking
may occur. Allow griddle plate to cool down before cleaning.
NOTE:
 DO NOT use strong solvents, abrasive or caustic detergents as they could corrode or
damage the griddle.
 To prevent rust forming on the griddle plate (Steel Plate), ensure that any detergent or
cleaning material has been completely removed after each cleaning. The appliance should
be switched 'On' briefly to ensure the griddle plate is dry. Spread oil or grease over the
griddle surface to form a thin protective greasy film.
To keep your griddle clean and operating at peak efficiency, follow procedures shown below:-

After Each Use

Always apply even pressure over whole surface of scraper tool when using on
flat surface of griddle, to prevent scoring of griddle surface.
NEVER bang sharp edge of scraper tool on flat surface of griddle as this will
damage griddle and invalidate the warranty.
1.
Clean griddle with supplied scraper tools to remove any food debris.
2.
Always ensure scraper tool blades are changed regularly to ensure that scraper tool works efficiently
and prevents damage to griddle plate surface.
Always turn 'Off' gas supply before cleaning.
This appliance is not water proof.
Caution
Warning
Caution
16
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gp514Gp516Gp518

Table of Contents