Other Programming - Panasonic KX-TGC210NZ Operating Instructions Manual

2
MbN: Select the entry to be blocked. a
M N
3
MbN: "Save CID" a MOKN
4
MbN: "Nuisance Call Block" a
MOKN
5
MbN: "Yes" a MOKN a M
n By entering phone numbers:
1
M N#217
2
MbN: "Single Number" a MOKN
3
M N a MbN: "Add" a MOKN
4
Enter the phone number (24 digits
max.).
R To erase a digit, press MCN.
5
MOKN a M N
Storing a range of numbers
1
M N#217
2
MbN: "Range of Numbers" a MOKN
3
M N a MbN: "Add" a MOKN
4
Enter the desired number (2-8 digits).
R To erase a digit, press MCN.
5
MOKN a M N
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers.
1
M N#240
2
MbN: Select the desired setting. a MOKN
3
M N
Viewing/editing/erasing call
block numbers
1
M N#217
2
MbN: "Single Number" or "Range of
Numbers" a MOKN
3
MbN: Select the desired entry.
R To exit, press M
TGC21x_22xNZ_OI_(en-en)_0513_ver.002.pdf
4
Note:
N
R When editing, press the desired dial key to
Erasing all call block numbers
1
2
3
4
5

Other programming

Changing the handset name
Each handset can be given a customised
name ("Bob", "Kitchen", etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is "No". If you select
"Yes" without entering any handset name,
"Handset 1" to "Handset 3" is displayed.
1
2
3
4
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 28) will
N.
include area codes. If you do not want to dial
25
Programming
To edit a number:
M N a Edit the number. a MOKN a
M N
To erase a number:
M N a MbN: "Yes" a MOKN a M
add, MCN to erase.
M N#217
MbN: "Single Number" or "Range of
Numbers" a MOKN
M N a MbN: "Erase All" a MOKN
MbN: "Yes" a MOKN
MbN: "Yes" a MOKN a M
M N#104
Enter the desired name (10 characters
max.).
MOKN
MbN: Select the desired setting. a MOKN
2 times a M N
N
N
25
2014/05/13 12:05:48