4.5
Settings for Printing using IPP
Settings made on the controller side
If IPP (Internet Printing Protocol) is used, make the following settings on
PageScope Light. (Printing can be done with the default settings.)
1. Start PageScope Light.
2. Enter the password to log on to the Administrator mode.
3. Click the "Network" tab and then select "Common Setting" – "IPP."
4. Make the following settings.
Enable IPP
Setting values
Accept IPP Jobs
Setting values
Printer URI
Operational Supported
Setting values
4. Settings Required for Network Printing
: Set the IPP function.
: Enable, Disable
: Set the IPP reception function.
: Enable, Disable
: Displays the URL of the printer, with which data
can be printed using IPP.
: Specify the print operation supported by the IPP.
: Print Job, Validate Job, Cancel Job, Get Job
Attributes, Get Jobs, Get Printer Attributes
23
4334P235CA