Settings And Operations For Scan Functions - Minolta CN3101e User Manual

7. Settings and Operations for Scan Functions

This chapter explains how to make settings for and operate the scan functions that
become usable when the controller is added.
The copier control panel or PageScope Light is used for setting. Refer to Usage of
PageScope Light on Appendix B for the procedures to start PageScope Light and
log in the administrator mode. p.138
The following scan functions are available for use:
• File (Scan to PC)
• File (Scan to FTP Server) : Transfers scanned image data to the server through
• Scan to E-mail
• File (Scan to HDD)
• Scan to Internet FAX
The following environment is necessary to use the scan functions.
Network environment using TCP/IP protocol
• File (Scan to PC)
• File (Scan to FTP Server) : The FTP server application must be installed in
• Scan to E-mail
• Scan to Internet FAX
: Transfers scanned image data to the PC through
FTP. p.64
FTP. p.69
: Transfers scanned image data as a file attached to e-
mail. p.86
: Captures scanned image data to the hard disk of the
copier. p.77
: Transmits and receives image data through the
Internet Fax standard.
: The FTP server application must be installed in
the receiving PC.
the receiving PC.
: A mail server must be available for the network.
: A mail server must be available for the network.
When data is to be transmitted, it is necessary that
the machine on the receiving end be capable of
receiving Internet Fax.
p.94
61