Table of Contents
Advertisement
Direct Input
The address used in Scan to E-mail can be directly input from the control panel of
the copier, instead of using the one-touch key or one time key.
1. Press the Scan key on the copier.
2. Select "Direct."
3. Select "E-MAIL."
4. Using keys on the control panel and 10-Key Pad, type the e-mail address of the
destination. (1800 alphanumeric characters or less; if two or more addresses are
entered, place "," between two different addresses.)
5. Select "Enter." This brings you back to the scan basic screen.
6. Set the scanning mode. (Ref.: Setting the Scanning Mode)
7. Specify the document. (Ref.: Specifying the Document)
8. Press the Start key.
7. Settings and Operations for Scan Functions
4334P202CA
4334P203CA
p.92
p.92
91
Advertisement
Table of Contents
