Show; Smb - Ricoh Pro C550ex Network Manual

1. Monitoring and Configuring the Machine
• Disabling IPv4 also disables web, snmp, ssl, http, and bonjour.
msh> set ipv6 {up|down}
• If you disable IPv6, you cannot use remote access after logging off. If you did this by mistake,
1
you can use the control panel to enable remote access via IPv6.
• Disabling IPv6 also disables ssl6, http6, and bonjour6.
msh> set ipsec {up|down}
msh> set smb {up|down}
msh> set web {up|down}
msh> set snmp {up|down}
msh> set ssl {up|down}
msh> set ssl6 {up|down}
• If Secured Sockets Layer (SSL, an encryption protocol) function is not available for the machine,
you cannot use the function by enabling it.
msh> set nrs {up|down}
msh> set rfu {up|down}
msh> set rfu6 {up|down}
msh> set http {up|down}
msh> set http6 {up|down}
msh> set bonjour {up|down}
msh> set bonjour6 {up|down}
msh> set nbt {up|down}

show

Use the "show" command to display network interface board configuration settings.
View settings
msh> show
• If "-p" is added, you can view settings one by one.

smb

Use the "smb" command to configure or delete the computer or workgroup name for SMB.
Computer name settings
msh> smb comp "computer name"
38