Ipv6; Passwd - Ricoh Pro C550ex Network Manual

1. Monitoring and Configuring the Machine
The following explains how to configure an IPv4 address 192.168.15.16 on Ethernet interface.
msh> ifconfig ether 192.168.15.16
IPv6 configuration
1
msh> ifconfig ether inet6 "interface_name" "machine_name"
The following explains how to configure a IPv6 address to 2001:DB8::100 with prefix length 64 on
the Ethernet interface.
msh> ifconfig ether inet6 2001:DB8::100 64
Netmask configuration
msh> ifconfig "interface_name" netmask "address"
The following explains how to configure a subnet mask 255.255.255.0 on Ethernet interface.
msh> ifconfig ether netmask 255.255.255.0
Broadcast address configuration
msh> ifconfig "interface_name" broadcast "address"
• To get the above addresses, contact your network administrator.
• Use the default configuration if you cannot obtain setting addresses.

ipv6

Use the "ipv6" command to display and configure IPv6 settings.
View Setting
msh> ipv6
IPv6 stateless address
msh> ipv6 stateless {on|off}
If "on" is selected, IPv6 requests information required for maintaining stateful connection to the router
for as long as the machine power is turned on. This setting allows information from the router to be
obtained constantly, and periodically refreshes the effective period of the stateless address.

passwd

Use the "passwd" command to change the remote maintenance password.
Changing the Password
msh> passwd
• Enter the current password.
34