Table of Contents
Advertisement
Control Connections
Vitodens 200-W B2HB 45, 57 Installation
Reinstalling the Front Enclosure Panel
10. Set front enclosure panel on the guide rails and
push in place.
11. Tighten screws at the bottom.
12. Insert the external accessories connection box
cover in place.
Note: Ensure the locking screws are fitted before
operating.
Instructing the system user
The system installer should hand the operating
instructions to the system user and instruct the user in
operating the system.
IMPORTANT
Read and follow, where applicable, the safety instructions
of all labels and stickers attached to boiler surfaces. Do
not remove any of these instructions. Contact Viessmann
if any replacement labels are required.
56
Advertisement
Table of Contents
