Dim Function - Friedrich S S 08 Installation And Operation Manual

Use the or buttons to adjust the minutes. The clock is now set
for 11:25 AM. Press TIMER SET (Refer to Figure 10) button to display the
unit's day setting.
Use the or buttons to adjust the day (1 to 7). The day setting is up
to the you the user. If you set the current day = 1, and today is Tuesday,
then Day 1 = Tuesday.
AUTO FAN
Press TIMER SET (Refer to Figure 10) button to exit and save the SET
TIME function. The TIMER SET button must be pressed within 15 second.
Button inactivity for more than 15 seconds causes the display to time out
and return to the normal operating display.
ºF - ºC Select
AUTO FAN
13
FRR129
FRR130
F
SET POINT
FRR131
F
SET POINT
FRR132
To switch from degrees Fahrenheit (F) to Celsius (C), press
buttons for three seconds.
from F to C, press the or
AUTO FAN
The ºF icon goes away and the ºC icon illuminates on the normal display.

DIM Function

There are three separate display brightness levels, AUTO, 20% and full
(100%). To change the DIM setting, press the Power button for three
seconds.
The 1 indicates a DIM setting of Auto (factory default). Use the
buttons to change the setting.
button within 5 seconds.
C
SET POINT
or
FRR133
FRR134
FRR135
FRR192
or