To Start Unit; Function Control; Temperature Control; Moneysaver ® Switch - Friedrich QuietMaster Deluxe RS10 Operating Manual

How to operate your Friedrich room air con di tion er
Off
Fan
Only
High
Cool
Med
Cool
Yes No
Warmer Cooler
Wait three minutes before restarting
Figure 3
4
920-061-05 (10-04)
Sleep
Setting
Mode
Low
Cool
Money Saver
Temperature

To start unit

If your air conditioner is installed and plugged into a proper
re cep ta cle, it is ready to op er ate.

Function control

The dial control allows you to select cool ing at four different
speeds, as well as FAN ONLY.
Turn to OFF to turn everything off.
Turn to HI COOL for quick cooling.
Turn to MED COOL to maintain a de sired tem per a ture.
Turn to LO COOL when demand is low.
Turn to SLEEP SETTING for night time use, or when
demand is low.
The FAN ONLY setting will circulate air in the room
without the compressor coming on. The FAN ONLY
setting can also be used with the EXHAUST air set ting to
remove stale air or smoke from the room, or it can be used
with the FRESH AIR setting to bring outside air into the
room. This is especially useful in the spring and fall when
cooling may not be necessary.

Temperature control

This dial is the thermostat. Turn it clock wise for cooler and
coun ter clock wise for warmer.
®
MoneySaver switch
This rocker switch can be depressed to ei ther YES or NO.
In the YES position you will get the most economical
op er a tion. Both the fan and compressor will cycle on
and off together, main tain ing the selected temperature
at a more constant level and reducing the humidity more
effi ciently. This control will only operate when the unit is
in a COOLING mode. In the NO position, the fan will run
constantly as long as the unit is in the cooling mode.