Initial Volume - Yamaha Aventage RX-A1050 Owner's Manual

■

Initial Volume

Sets the initial volume when the receiver is turned on.
Settings
Sets the level to the volume level of the unit when it last entered
Off
standby mode.
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
On
(This setting works only when the initial volume is set lower than "Max
Volume".)
■
Pure Direct Mode
Selects whether to output video signals during the Pure Direct mode (p.64).
Settings
Automatically outputs video signals when any videos are input from the
selected input source or an input source that can be operated with the
Auto
on-screen display is selected. When no video signals are input, the
wall paper is displayed.
Video Off Does not output video signals including the wall paper.
■
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level.
Settings
Off Does not adjust the effect level automatically.
Adjusts the effect level automatically according to the YPAO
On
measurement results and the volume level.
■
CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D (p.60). If this function is set to "On", CINEMA DSP
3D functions with the selected sound programs (except 2ch Stereo and 7ch Stereo).
Settings
Off Disables CINEMA DSP 3D.
On Enables CINEMA DSP 3D.
■
Virtual Surround Back Speaker
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround
speakers. When VSBS is enabled, the unit creates VSBS when no surround back
speakers are connected.
Settings
Off Disables Virtual Surround Back Speaker (VSBS).
On Enables Virtual Surround Back Speaker (VSBS).
• VSBS is effective only when 6.1- or 7.1-channel content is played back.
■
Object Decode Mode
Enables/disables playback of object-based audio signals such as Dolby Atmos
contents.
Settings
Disables playback of object-based audio signals. Those signals will be
Disable
played in normal 5.1-/7.1-channel audio.
Enable Enables playback of object-based audio signals.
• Regardless of this setting, object-based audio signals are played in normal 5.1-/7.1-channel audio if any of
CINEMA DSP programs is selected.
118
En