Branson 6640C Operator's Manual page 78

3) DRAFT CONTROL DIAL
DASH METER LAMP
Draft control dial allows the implement to be automatical-
ly lifted up depending on the load on the rear implement.
It will operate with larger weight as dial is turned CW.
It will operate manually when dial is completely turned
CCW and towing power lamp is turned off in gauge.
6640C OPERATORS MANUAL (012612).indd 78
4) STOP/CLOW RETURN DIAL
The rate at which the 3PT link and mounted implement
will drop is controlled by turning the dial. The rate of
down varies with the setting of control and the weight of
the mounted implement. The heavier the implement, the
faster the rate of down. The lighter the implement, the
slower the rate of down.
if you turn the dial fully to the right, the hydraulic pressure
to the device raising the implement is stopped.
• • •
78
FUNCTIONS
1/30/2012 2:30:50 PM