Combination Switch; F/R Shuttle Lever - Branson 6640C Operator's Manual

4. COMBINATION LAMP SWITCH
Tail lamp and dash meter will be lit when light switch is
turned CCW once. When turned once again, high beam
or lower beam will be lit. For direction light, bring the le-
ver forward to light for right and backward to light for left.
To use horn, press on side of light switch.
6640C OPERATORS MANUAL (012612).indd 60

5. F/R SHUTTLE LEVER

It is used for shifting between "forward" and "reverse"
drive. When shifting the gear, depress the clutch fully.
[Precaution]
For safety, when shifting from "forward" to "reverse" or
from "reverse" to "forward", put the lever in the "neutral"
position and wait for the tractor to stop moving before
shifting the gear to the opposite direction. To ensure
safety, the lever must first be pulled upward for shifting to
another position.
• • •
60
FUNCTIONS
1/30/2012 2:30:33 PM