Branson 6640C Operator's Manual page 64

5) PTO LAMP
PTO indicator lamp will light up when PTO ON/OFF switch is
turned on.
6) PARK BRAKE LAMP
Lamp will light up when parking brake is pulled up.
At this stage, drive is not possible even when gear is changed
with shuttle lever.
Release parking brake and change shuttle lever.
6640C OPERATORS MANUAL (012612).indd 64
7) PRE-HEAT LAMPPTO WORK
Lamp will light on/off depending on temperature of engine cool-
ant when main key switch is turned on. Lamp will be turned
off when heater coil is heated. Start engine after this lamp is
turned off.
It is difficult to start engine in winter when starting engine be-
fore warm up lamp is turned off. It also causes early discharge
of battery.
8) ENGINE OIL PRESSURE LAMP
Lamp will come on when the ignition switch is put into the "ON"
position. It will turn off when the engine is started.
If this lamp comes on while the engine is running, it indicates a
problem in the engine oil system. Stop the engine immediately
and check for problems.
• • •
64
FUNCTIONS
1/30/2012 2:30:46 PM