Circuit Overloading; Reduced Airflow; Mechanical Loading - Minicom DX System User Manual

Minicom advanced systems user guide switch dx system

Hide thumbs Also See for DX System:

Table of Contents

DX SYSTEM

Install the equipment in a rack in such a way that the amount of airflow required for

safe operation is not compromised. Leave a gap of at least 5cm/2" each side of the

DX Central unit.

Mount the equipment in the rack in such a way that a hazardous condition is not

achieved due to uneven mechanical loading.

Circuit overloading

When connecting the equipment to the supply circuit, consider the effect that

overloading of circuits might have on over-current protection and supply wiring.

Reliable earthing of rack-mounted equipment should be maintained. Give attention

to supply connections other than direct connections to the branch circuit (e.g. use of

power strips).

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the DX System and is the answer not in the manual?

Dx user Dx 432 Dx 832