Subaru WRX STI Owner's Manual page 60

colored unlocking marker which is
attached to the bottom of the lock
release knob is invisible. For details,
refer to Folding down the rear seat-
back 1-9.
2. You will find marks at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower an-
chorages (bars).
Seat, seatbelt and SRS airbags/Child restraint systems
Remove the covers and locate the lower
anchorages (bars).
3. Remove the rear seat head restraint.
For details, refer to Head restraint adjust-
ment 1-8.
CAUTION
. When you install a child restraint
system, follow the manufac-
turer s instructions supplied with
it. After installing the child re-
straint system, check to ensure
that it is held securely in posi-
tion. If it is not held tight and
secure, the danger of your child
suffering personal injury in the
event of an accident may be
increased.
I n f o r ma t i o n P r o v i d e d b y :
. Store the head restraint that has
been removed in the cargo area.
Avoid placing the head restraint
in the passenger compartment to
prevent it from being thrown
around in the passenger com-
partment in a sudden stop or a
sharp turn.
4. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the lower hooks onto the
lower anchorages located at
the bottom of the rear seatback. When the
hooks are connected, make sure the
adjacent seatbelts are not caught.
CONTINUED
1-31
marks on