Subaru WRX STI Owner's Manual page 434

2016
Hide thumbs Also See for WRX STI:
Table of Contents

Advertisement

WARNING
. Before exiting the vehicle, make
sure that you turn off the engine.
Otherwise, the parking brake
may be released and an accident
may occur.
. If the brake system warning light
turns on, the electronic parking
brake system may be malfunc-
tioning. Immediately stop your
vehicle in a safe location, use
tire stops under the tires to
prevent the vehicle from moving
and contact your SUBARU deal-
er.
. If the electronic parking brake is
operated when the brake is over-
heated or the vehicle is on a
steep slope, the electronic park-
ing brake indicator light may
flash. In this case, the vehicle
may start to move and it may lead
to an accident. Always use the
tire stops.
CAUTION
. When the electronic parking
brake system has a malfunction
and the parking brake cannot be
applied, contact your SUBARU
dealer immediately for an inspec-
tion. If you have to park your
vehicle in such conditions, per-
form the following procedure.
Stop your vehicle in a flat
location.
Shift the select lever in the P
position. When the select le-
ver cannot be shifted into the
P
position, you must re-
lease shift lock. Refer to Shift
lock function
7-27.
Use tire stops under the tires
to prevent the vehicle from
moving.
. Never drive while the parking
brake is applied because this will
cause unnecessary wear on the
brake linings. Before starting to
drive, always make sure that the
parking brake has been released
and the brake system warning
light has turned off.
Your vehicle is equipped with an electronic
parking brake. You can apply/release the
parking brake by operating the parking
brake switch.
To apply: Depress the brake pedal and
pull up the parking brake switch.
I n f o r ma t i o n P r o v i d e d b y :
Starting and operating/Parking your vehicle
To release: Press the parking brake
switch firmly while the ignition switch is
in the ON position and the brake pedal is
depressed.
When the parking brake is applied while
the ignition switch is in the ON position,
the electronic parking brake indicator light
and the indicator light on the parking brake
switch illuminate. Refer to Brake system
warning light
3-21.
NOTE
. If the parking brake switch is
pressed with the ignition switch in the
ACC or LOCK / OFF position, the
parking brake is not released.
. If the parking brake switch is
pressed without depressing the brake
pedal, the parking brake is not re-
leased.
. The electronic parking brake system
uses motors to apply the parking
brake. Therefore, operating sounds
from the motors will be heard when
applying or releasing the parking
brake. Make sure that the motor
sounds are heard when applying or
releasing the parking brake.
. When the electronic parking brake
system has a malfunction or the elec-
tronic parking brake operation is pro-
hibited temporarily, if the parking brake
7-45
CONTINUED

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrx

Table of Contents