Subaru WRX STI Owner's Manual page 219

3-90
Instruments and controls/Multi function display
4. Select the preferred setting by operat-
ing the or switch. Then push the
button.
5. Select Set by operating the
switch, and confirm the setting by pushing
the button.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
I n f o r ma t i o n P r o v i d e d b y :
Welcome lighting setting
The leaving time and approaching time
settings can be adjusted.
Leaving time setting
1. Perform the preparation steps accord-
ing to Preparation for car settings
2. Operate the or
select the Welcome Lighting item, and
then push the switch.
3-83.
switch to