Setting The Clock - Panasonic DMC-TZ2 Operating Instructions Manual

3

Setting the clock

Preparations
Set mode dial (P.13) to NORMAL PICTURE mode
'PLEASE SET THE CLOCK' will be displayed when power is turned on for the first time.
Power
Note
Failure to set the clock will mean
correct date will not be printed
(P.76) when printing pictures in
digital photo centre or when using
DATE STAMP (P.66).
Time is displayed in 24-hour
format. Year can be set between
2000 and 2099.
Clock settings will be saved for
approx. 3 months even after
battery is removed, provided a
fully-charged battery was installed
in camera for the 24 hours
beforehand.
16
VQT1B74
before turning on power.
While this message is displayed
Press
Adjust year, month, date, time
CLOCK SET
Select
0 00 : 1 . JAN . 2007
D M Y
CANCEL
SELECT SET SET
Adjust
Select to change
date format
Set
Press
Turn on power again and check time
display.
To change time setting
Select 'CLOCK SET' from SETUP
menu (P.18), perform and above,
and press .
To set local time at overseas
destination
'WORLD TIME' (P.49)
4
Know the different menus
Preparations
to get more out of your camera
This camera contains a range of menus to enable you to set your photography and
playback preferences, and to make the camera easier and more fun to use.
The 'SETUP' menu in particular contains important functions, such as for time and power
source. Please check these settings before use.
Making the camera more convenient to use (SETUP menu) (P.20)
Make settings for ease of use such as adjusting the clock
1
SETUP /
4
and changing the beep sounds.
CLOCK SET
Applicable modes (P.13):
WORLD TIME
MONITOR ± 0
GUIDE LINE
TRAVEL DATE
OFF
SELECT EXIT
Changing photography preferences (REC menu) (P.50)
Make settings such as white balance, sensitivity, aspect
1
REC /
3
ratio, and picture size.
W.BALANCE
AWB
Applicable modes (P.13):
SENSITIVITY
AUTO
ASPECT RATIO
PICT.SIZE
QUALITY
(Screen example: DMC-TZ3)
SELECT EXIT
Using your pictures (PLAY menu) (P.64)
Make settings for using the pictures you have taken,
1
PLAY /
3
including rotating, protecting, trimming, and handy settings
DUAL DISPLAY
for printing your pictures (DPOF).
SLIDE SHOW
Applicable modes (P.13):
FAVORITE
OFF
ROTATE DISP.
ON
ROTATE
(Screen example: DMC-TZ3)
SELECT EXIT
The following menus are also included:
To make photography settings to fit certain scenes, e.g. night
→ SCENE menu (P.40)
To easily change settings such as picture quality, for beginners
→ SIMPLE MODE menu (P.29)
17
VQT1B74