Panasonic DMC-TZ2 Operating Instructions Manual page 12

6
Using SETUP menu
Preparations
Item
BEEP
1, 2 Change or mute beep sounds.
SHUTTER 1, 2 Change or mute shutter sounds.
VOLUME
2 Adjust volume of sound from speakers (7 levels).
Reset image file numbers and start again from '0001'.
NO. RESET
1
File numbers and folder numbers (P.75)
Reset SETUP menu (P.20) and REC menu items (P.50) to
RESET
2
their default settings.
Change the video output format when connected to a TV, etc.
VIDEO OUT
(PLAYBACK mode only)
Change the aspect ratio when connected to a TV, etc
TV ASPECT
(PLAYBACK mode only).
SCENE MENU
Display scene menu when mode dial is set to SCN1 or SCN2.
DIAL DISPLAY
1, 2 Display mode dial operation on screen.
LANGUAGE
1, 2 Change display language.
22
VQT1B74
(Continued)
Uses, operations
Default setting outlined:
1 Settings also reflected in SIMPLE MODE
2 Settings also reflected in CLIPBOARD mode
Settings, notes
Volume: (mute) / (low) / (high)
Volume: (mute) / (low) / (high)
0 · · LEVEL3 · · LEVEL6
Cannot be used to adjust TV speaker volume when connected to TV.
YES/NO
Numbers cannot be reset once folder number reaches 999. In this case, save all
necessary pictures to your computer, and format the built-in memory/card. (P.73)
To reset folder number to 100:
First, format (P.73) the built-in memory or card, and reset the file numbers using NO.
RESET. Then, select 'YES' on the folder number reset screen.
RESET REC. SETTINGS? (YES/NO)
Resetting SETUP parameters causes the following to be reset: Birthdays in BABY
(P.42) and PET modes (P.44), 'TRAVEL DATE' (P.48), 'WORLD TIME' (P.49), 'ZOOM
RESUME' (P.20), 'FAVORITE' in PLAY menu (set to 'OFF') (P.65), 'ROTATE DISP.' (set
to 'ON') (P.66), CLIPBOARD menu (INITIAL DISP.) (set to 'ON') (P.60)
(Only 'BEEP' is reset in the SIMPLE MODE menu.)
Folder numbers and clock settings will not be reset.
NTSC / PAL
/
When set to , pictures will be displayed vertically long on LCD monitor when
connecting AV cable (supplied) (P.79).
OFF (use previously selected scene mode) / AUTO (displays scene menu)
To display scene menu when set to 'OFF': Press 'MENU/SET'.
OFF / ON (display)
ENGLISH / DEUTSCH (German) / FRANÇAIS (French) / ESPAÑOL (Spanish) /
ITALIANO (Italian) / 日本語 (Japanese)
(P.28).
(P.58).
Tone: / /
Tone: / /
RESET SETUP PARAMETERS? (YES/NO)
VQT1B74
23