Before Use; Read First; To Prevent Damage And Faults; Standard Accessories - Panasonic DMC-TZ2 Operating Instructions Manual

Before use

Read first

Do a test shot first!
Check first to see if you can take
pictures and record sounds (motion
pictures/pictures with audio)
successfully.
We will not compensate for failed/
lost recording or for direct/indirect
damage.
Panasonic will not provide
compensation even if damage is
caused by faults with camera or card.
Certain pictures cannot be played
back
Pictures edited on a computer
Pictures taken or edited on a different
camera
(Pictures taken or edited on this camera
may also not be able to be played back
on other cameras)
Software on the CD-ROM supplied
The following actions are prohibited:
Making duplicates (copying) for sale or
rent
Copying onto networks
LCD monitor characteristics
Extremely high precision technology is
employed to produce the LCD monitor
screen. However there may be some dark
or bright spots (red, blue or green) on the
screen. This is not a malfunction.
The LCD monitor screen has more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
The spots will not be recorded on pictures
on the built-in memory or a card.
10
VQT1B74

To prevent damage and faults

Avoid shocks, vibration, and pressure
Avoid exposing the camera to strong
vibration or shock; e.g. dropping or
hitting the camera, or sitting down with
the camera in your pocket.
Do not press the lens or the LCD monitor.
Do not get the camera wet or insert
foreign objects
Do not expose the camera to water,
rain, or seawater.
(If camera gets wet, wipe with a soft,
dry cloth. Wring cloth thoroughly first if
wet with seawater, etc)
Avoid exposing lens and socket to dust
or sand, and do not allow liquids to leak
into gaps around buttons.
Avoid condensation caused by sudden
changes in temperature and humidity
When moving between places of
different temperature or humidity, place
camera into a plastic bag and allow to
adjust to conditions before use.
If the lens clouds up, switch off the
power and leave for about two hours to
allow camera to adjust to conditions.
If the LCD monitor clouds up, wipe with
a soft, dry cloth.
When transporting
Switch off power.
We recommend using a genuine leather
case (DMW-CT3, optional).
Lens
● Do not leave in direct sunlight.
● If dirty, clean with soft, dry cloth.

Standard accessories

Part numbers are as of January 2007
Battery Pack
CGA-S007E
(P. 14)
(referred to in this manual as 'battery')
Battery Charger
DE-A46A
(P. 14)
(referred to in this manual as 'charger')
Battery Carrying
Case
VYQ3680
(P. 91)
AC Mains Lead
K2CT3CA00004
(P. 14)
Strap
VFC4090
(P. 12)
USB Connection
Cable
K1HA08CD0007
(P. 74, 76)
AV Cable
K1HA08CD0008
(P. 79)
CD-ROM
The following software on the CD-ROM
is referred to in this manual as 'supplied
software'.
LUMIX Simple Viewer
PHOTOfunSTUDIO -viewer-
Cards are optional. You can record or play
back pictures on the built-in memory when
you are not using a card. (P.26)
Consult the dealer or your nearest
servicentre if you lose the supplied
accessories. (You can purchase the
accessories separately.)
Optional Accessories
Lithium Ion Battery: CGA-S007E
AC Adaptor: DMW-AC5EB
Leather Case: DMW-CT3
Semi Hard Case: DMW-CHTZ3
Marine Case: DMW-MCTZ3
SDHC Memory Card
4GB: RP-SDR04GE1K
SD Memory Card
2 GB: RP-SDK02GE1A, RP-SDQ02GE1A
1 GB: RP-SDK01GE1A, RP-SDH01GE1A,
RP-SDR01GE1A
512 MB: RP-SDK512E1A, RP-SDR512E1A
256 MB: RP-SDH256E1A, RP-SDR256E1A
128 MB: RP-SD128BE1A
USB2.0 Reader/Writer
BN-SDUSB2E
CardBus PC Card Adapter
BN-SDPC3E
Some optional accessories may not be
available in some countries.
SDHC memory cards
New standards set in 2006 by SD
Association for high-capacity memory cards
exceeding 2GB.
Can be used on SDHC memory card-
compatible devices, but not on devices only
compatible with SD memory cards.
VQT1B74
11