Panasonic DMC-TZ2 Operating Instructions Manual page 11

Table of Contents

Advertisement

6
Using SETUP menu
Preparations
'CLOCK SET', 'AUTO REVIEW', 'POWER SAVE' and 'ECONOMY' are important for
clock setting and battery life. Be sure to check these before use.
Item
CLOCK SET
1, 2
Set the date and time.
WORLD TIME
1, 2
Set the local time at an overseas destination (P.49)
MONITOR
1, 2
Adjust the brightness of the LCD monitor (7 levels).
Change the pattern of the guide lines displayed when taking
pictures.
GUIDE LINE
Display recording information or histogram together with guide
lines (P.33).
TRAVEL DATE
1, 2
Record the number of days elapsed in your travels.
Automatically display pictures immediately after taking
them.
AUTO REVIEW
Select display time (seconds).
'ZOOM' is useful for checking focus.
Automatically shut off power while not in use.
(Saves battery consumption)
POWER SAVE
To restore: Press the shutter button halfway, or turn on the
power again.
ZOOM RESUME
1, 2
Remember the zoom ratio when turning power off.
Restrict battery consumption when recording.
(Dims LCD monitor, automatically shuts off monitor when not
in use.)
ECONOMY
Monitor also shut off during flash battery charging.
Status indicator is illuminated while monitor is off.
To restore: Press any button.
20
VQT1B74
Uses, operations
Make general camera settings such as adjusting the clock, extending the battery
life, and changing the beep sounds. (Settings method → P.18)
Default setting outlined:
1
Settings also reflected in SIMPLE MODE
2
Settings also reflected in CLIPBOARD mode
DMC-TZ3 only.
3
Settings, notes
Set the date/month/year and time (P.16).
(DESTINATION) /
(HOME)
-3 · · ±0 · · +3
REC. INFO.(Recording information): OFF / ON HISTOGRAM: OFF / ON
PATTERN:
/
'PATTERN' cannot be selected in CLIPBOARD mode (P.58). Recording information and
histogram cannot be displayed.
Not displayed in SIMPLE MODE.
OFF / SET (P.48)
OFF / 1SEC. / 3SEC. / ZOOM
3
(displays for 1 second, then at 4x zoom for 1
second)
In 'SELF PORTRAIT' scene mode (P.42), 'AUTO BRACKET'
(P.54), or pictures with audio (P.53, 70), auto review performed regardless of setting.
Motion pictures cannot be automatically reviewed.
OFF / 1 MIN. / 2 MIN. / 5 MIN. / 10MIN. (Set time before POWER SAVE is initiated)
Cannot be used in the following cases:
When using AC adaptor (DMW-AC5E, optional), when connected to computer/printer,
during motion picture recording/playback, during slideshows (exception: set to 10
minutes while slideshow is paused and during 'MANUAL' slideshows)
Setting fixed to '2 MIN.' in 'ECONOMY', and to '5 MIN.' in SIMPLE MODE (P.28) and
CLIPBOARD (P.58).
Focus position cannot be stored.
OFF / ON
Released and cannot be set when using 'SELF PORTRAIT' scene mode.
OFF / LEVEL 1 (turned off after approx. 15 seconds of inactivity)/LEVEL 2 (turned off
after approx. 15 seconds, or approx. 5 seconds of inactivity after recording)
Cannot be used in the following cases:
When using SIMPLE MODE, CLIPBOARD mode ,or AC adaptor (DMW-AC5E,
optional), when menu screen is displayed, when using self-timer setting or during
motion picture recording.
LCD monitor not dimmed when using 'POWER LCD' or 'HIGH ANGLE' (P.34).
(P.28).
(P.58).
3
(P.38), 'BURST' mode
21
VQT1B74

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-tz3

Table of Contents