Panasonic DMC-TZ2 Operating Instructions Manual page 45

3
Q&A
Others
Troubleshooting (Continued)
TV, computer, printer
No image appears on TV. Image blurred or not coloured.
Not connected correctly (P.79).
TV input setting not set to auxiliary input.
'VIDEO OUT' not set to 'PAL' (P.22).
TV screen display different to LCD monitor.
Aspect ratio may be incorrect or edges may be cut off with certain televisions.
Cannot play motion pictures on TV.
Card is inserted into TV.
→ Connect with AV cable (supplied) and play on camera (P.79).
Picture is not displayed on full TV screen.
Check 'TV ASPECT' settings (P.22).
Cannot send pictures to computer.
Not connected correctly (P.74).
Check whether computer has recognised camera. (See separate 'PC connection')
Computer does not recognise card (only reads built-in memory).
Disconnect USB cable and reconnect with card in place.
I want to play computer pictures on my camera.
Use the supplied software PHOTOfunSTUDIO-viewer- to copy pictures from computer
to camera. To save to clipboard, use software to copy from computer to card, then
copy to clipboard folder with 'COPY' (P.73) in PLAY menu.
Cannot print when connecting to printer.
Printer not compatible with PictBridge.
Mode dial not set to .
Edges cut off pictures when printing.
Release any trimming or edgeless printing settings on printer before printing.
(Consult printer operating manual.)
Pictures taken on 'ASPECT RATIO' (P.51).
→ If printing in shop, check if 16:9 sizes can be printed.
88
VQT1B74
Others
Menu not displayed in desired language.
Change 'LANGUAGE' setting (P.22).
Camera rattles if shaken.
This sound is made by the lens movement and is not a fault.
Cannot set 'AUTO REVIEW'.
Cannot be set when any of the following are in use: 'AUTO BRACKET' (DMC-TZ3
only) (P.38), 'BURST' (P.54), 'SELF PORTRAIT' scene mode (P.42), MOTION
PICTURE mode (P.47), or 'AUDIO REC.' (P.53).
Red lamp illuminated when pressing shutter button halfway in dark locations.
'AF ASSIST LAMP' set to 'ON' (P.56).
AF ASSIST LAMP is not illuminated.
'AF ASSIST LAMP' is set to 'OFF' (P.56).
Not illuminated in bright locations or when using 'SCENERY', 'NIGHT SCENERY',
'SELF PORTRAIT' (P.42), 'FIREWORKS', or 'AERIAL PHOTO' (P.44) scene modes.
Camera is hot.
Camera may become a little warm during use, but this does not affect performance or
quality.
Lens makes a clicking noise.
When brightness changes, the lens may make a clicking noise and the monitor
brightness may also change, but this is due to aperture settings being made.
(Does not affect recording.)
Clock is incorrect.
Camera has been left for a long period.
→ Reset the clock (P.16).
(Date will be set to '0:00 0. 0. 0' for pictures if clock is not set.)
Long time was taken to set clock (clock behind by this amount).
When using zoom, picture becomes slightly warped and the edges of the subject
become coloured.
Pictures may be slightly warped or coloured around the edges, depending on the
zoom ratio, but this is not a fault (P.27).
File numbers are not recorded in sequence.
File numbers are reset when new folders are created (P.75).
File numbers have jumped backwards.
Battery was removed/inserted with power on.
(Numbers may jump backwards if folder/file numbers are not correctly recorded.)
89
VQT1B74