Tires, Wheels And Ballast; Tires; Inflation Pressure; Wheels - Kubota F2890 Manual

28

TIRES, WHEELS AND BALLAST

TIRES, WHEELS AND BALLAST

TIRES

To avoid serious injury:
A Do not attempt to mount a tire on a rim. This
should be done by a qualified person with the
proper equipment.
A Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the Operator's Manual.
A Do not use tires other than those approved by
KUBOTA.
To avoid serious injury:
Never operate the machine with a loose rim, wheel,
or axle.
A Whenever bolts are loosened, retighten to
specified torque.
A Check all bolts frequently and keep them
tightened.
BInflation Pressure
Though the inflation pressure is factory-set to the
prescribed level, it naturally drops slowly in the course of
time. Thus, check it everyday and inflate as necessary.
Tire sizes
F2890 24 x 12 - 12,
Front
F3690
F2890 18 x 9.5 - 8,
Rear
F3690
Recommended
Inflation Max.
Pressure
140 kPa
4PR (1.4 kgf/cm )
250 kPa
4PR (2.5 kgf/cm )
(1) Ground

WHEELS

A Follow the same checking procedure when the
machine is first used.
BFront Wheels (Drive Wheels)
(A) "INSUFFICIENT"
(B) "NORMAL"
(C) "EXCESSIVE"