Planet Networking & Communication IPX-2100 User Manual page 74

Blind Transfer
Attended Transfer
Disconnect Call
Timeout for answer on
attended transfer（sec）
One Touch Recording
Call Forward
Do Not Disturb
Spy
Blacklist
Voicemail
Invite Participant
Create Conference
Return to conference with
participant
Return to conference
without participant
Allow unattended or blind transfers. It works like this: While on a
conversation with A, you dial the blind transfer key sequence. The
system says "Transfer" then gives you a dial tone, while A is on hold.
You dial the transferee number (B's number) and A is put through to
B immediately. Your line is off. The caller ID displayed to B is exactly
the same as the caller ID presented to you.
Allow attended transfer or supervised transfer. It works like this:
While on conversation with A, you dial the Attended Transfer key
sequence. The system says "Transfer" then gives you a dial tone,
while A is on hold. You dial the transferee number (B's number) and
talk with B to introduce the call, then you can hang up and A will be
connected with B. In case B does not want to answer the call, he/she
simply hangs up and you will be back to your original conversation.
Disconnect the current transfer call (for Attended transfer).
Set the timeout value
Configure the function key for One Touch Recording
Enable/Disable Call Forward and the settings of function keys for
different forward modes.
Enable/Disable "Do Not Disturb"
Configure the function keys for spy modes.
Add/Delete blacklisted number.
Configure the function keys for entering voicemail and check
extension voicemail.
In conference, the administrator can invite people into the
conference by dialing "0". After pressing "0", you will get dial tone,
and you can dial to invite people. After the call is connected, please
press ** to direct the people into the conference, or *# to hang up the
current call and return to the conference.
During the call, you can dial *0 to forward to the conference with the
callee.
In conference, the administrator can dial "0" to invite people into the
conference. After pressing "0", you will get dial tone, and you can dial
to invite the participant; when the call is connected, dial "**" to return
to the conference with invited participant.
In conference, the administrator can dial "0" to invite people into the
conference. After pressing "0", you will get dial tone, and you can dial
74
Internet Telephony PBX System
IPX-2100