Dvd Setup - Bush 40/233F User Manual

DVD Setup

Applies to models with built in DVD players
TV Display - Choose from the following options
4:3 Pan Scan
4:3 Letter Box
Wide
Speaker Setup - Choose from the following options
LT/RT Converts from multi-channel sound to mono
Stereo Converts from multi-channel sound to Stereo
Dual Mono - Choose from the following options
Stereo
Mono L
Mono R
Mix Mono
Dynamic Range - This is the difference between the quietest and loudest sounds. This setting works only with
DVD discs recorded in Dolby digital.
Full Set this to listen with the range recorded on the disc
3/4 Set this to listen with a range equivalent to a normal television
1/2 Set this to listen with a smaller difference between the maximum and minimum volume
1/4 Set this to listen with a smaller difference between the maximum and minimum volume
Off Set dynamic range to off
TV Type - Choose from the following options
PAL For discs from UK/Europe, Asia, Australia etc
Multi For both NTSC and PAL
NTSC For discs from North America, Japan etc
Default - Choose from the following options
Reset Resets all options in the 'DVD setup' menu back to the default settings
Tip: This TV/DVD player is pre-set to play Region 2 DVDs. In the event you wish to use the TV/DVD in
another country that uses different region discs, please visit www.umc-uk.co.uk. Select 'Product Support',
'Changing Region'.
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
PS Traditional picture format, often used on old fi lm
LB Traditional picture which has been adapted for widescreen
16:9 Widescreen picture format
Outputs 2 channels of sound both left and right
Outputs left side sound
Outputs right side sound
Outputs a single channel of sound but mix between right and left
25