Time Menu; Setup Menu - Bush 55/148F User Manual

Standard features
Simple everyday use

Time menu

Clock - Shows the date and time.
Time Zone - Change your current time zone.
Sleep Timer - Lets you set the sleep timer so the
television automatically switches off after a set amount
of time. Off -> 10min -> 20min -> 30min -> 60min ->
90min -> 120min -> 180min -> 240min.
OSD Timer - Lets you adjust the amount of time
the On Screen Menu stays on the screen before
disappearing.
Auto standby - Set Auto standby between 3 hours, 4
hours and 5 hours ( to turn off this function you must
exit Home Mode in the Picture Menu).

Setup menu

Language - Allows you to change the language of the
menu.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
32 Standard features
Audio language - Allows the user to change the audio
language.
Subtitle Language - Allows the user to change the
subtitle language.
Hearing Impaired - This allows the user to turn on
the Hearing Impaired function, this produces subtitles
on the screen which provide a description of what is
happening during the selected program.
PVR File System - Allows you to view the format and
performance of a USB key.
Blue Screen - Changes the background when there is
no input between clear and a blue background (Only
available on some sources).
Network Configuration - Allows you to manually set
your network settings on the TV (for more information
please see 'Network Configuration' page.
First Time Installation - Allows you to retune the
television for all digital channels, digital radio stations
and analogue channels.
HDMI CEC (Consumer Electronic Control) - Allows
HDMI devices to control each other and allows the
user to operate multiple devices with one remote
control. (only available with compatible devices)
Software Update (USB) - This menu lets you install
the new software/firmware onto the television.
Further details of how to do this will be issued with the
firmware. Contact the helpline or refer to the 'product
support' section of the website.
Reset TV - This resets the menus to factory settings
and will erase all TV channels stored on the television.