Bush 40/233F User Manual page 29

Frequently Asked Questions
Game I have connected
Consoles my Playstation/
Xbox to the TV
via Component
cables (red, green
& blue) but I am not
receiving any sound.
System I have changed the
Lock password on the
television and now
forgotten it.
USB Mode I have inserted a
USB Memory Key,
but the TV does not
recognise it.
USB Mode Using a USB
portable hard drive /
larger than 32GB.
DVD (For I have inserted a
TV models disc but it is not
with DVD playing.
only)
DVD (For I have pressed the
TV models eject button but the
with DVD disc is not coming
only) out.
USB I cannot change the
Record channel, access the
menu or use the red
button.
USB When using the
Record USB to record the
picture 'breaks up'
or experience loss of
sound.
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Component cables only provide HD pictures. For the sound you will need
to connect the red & white audio cables on the Playstation/Xbox to the
red & white phono inputs (or mini AV input where fi tted) on the rear of the
TV. Please refer to the 'Connections' pages.
There is a master password of 4711, to gain access to the TV menu and
reset the normal password.
Ensure the USB Memory Key is formatted to type FAT32.
If you wish to use a portable hard drive larger than 32GB, please note
that it must be formatted to the FAT32 fi le system in order to operate on
this TV. Windows XP/Vista computers are only capable of formatting up
to 32GB, therefore, you will need a software programme/utility to format
larger hard drives.
Please refer to the website, www.umc-uk.co.uk, for more information.
1) Ensure you have inserted the disc facing the correct way.
2) Ensure the disc is clean and is not scratched.
3) Some copied discs will not play.
4) Check the DVD is a region 2 disc – to change the region of the DVD
player, refer to www.umc-uk.co.uk, select 'Changing DVD Region' in the
'Product Support' section
To eject the disc hold the stop/eject button for 4 seconds.
During time shift you cannot change the channel, access the menu or
use the red button.
Check the USB memory stick meets the minimum read speed
requirements. Standard defi nition channels require a read speed of 20
MB/s (Mega Byte per second) and a
write Speed of 6 MB/s (Mega Byte per second) HD channels require the
read speed of 80 MB/s (Mega Byte per second) and a write speed of
40 MB/s (Mega Byte per second). USB 3.0 sticks should be used where
possible.
31