Detaching The Stand And Securing The Tv To A Wall - Bush 40/233F User Manual

Detaching The Stand And Securing The TV
To A Wall
Detaching the Stand
To detach the stand please remove the 6 screws
highlighted then remove the stand neck and base
from the rear of the TV set.
6 x
ST (4x14)
Securing the TV to a Wall
For maximum security in the home, when using a TV with its stand, anti-tip straps should be fi tted. These are
available from supermarket websites and other websites and are an easy, inexpensive and effective way of
ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered to
the wall or the furniture the TV is stood on, these are fi tted as follows.
Note - Please ensure that children do not climb on the
TV set.
A) Using one or both of the top wall-mounting holes
and screws fasten one end of the fastening cord/s to
the TV. (the screws are already supplied in the wall
mounting holes)
The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions.
RoSPA stated in 2010 that "Toddlers are particularly at risk of pulling fl at-screen televisions on to themselves. They
are unsteady on their feet and are attracted by colourful television images."
The risk is increased as televisions become lighter.
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
10
B) Secure the other end of the fastening cord/s
to your wall. (you will need screws/fi xings suitable
for your wall type - available separately from most
DIY stores).