Advertisement
4. To replace the roof bulbs, grasp the base (not the bulb itself) firmly with a pair of
needlenose pliers and pull gently. If you have difficulty reaching the bulbs, you
may unscrew the roof light mount and remove it from the car for easier access.
Headlights and Number Board Lights
1. Unscrew the 2 screws that hold the plastic light housing.
2. Pull the bulbs from the housing and remove the wires and 2-pin
connector. Replace entire wire harness unit.
If you had to pull any of the lighting wires from their track in order to change the
bulbs, tuck them carefully back into place to prevent harmful contact with other
internal parts and from hanging down into sight once the car is reassembled and
operating.
Marker Lights and Ditch Lights
1. Pull the bulbs from the end of the car, remove the wires
from the guides and unplug the 2-pin connector. Replace
Entire wire housing unit.
If you had to pull any of the lighting wires from their track
in order to change the bulbs, tuck them carefully back into
place to prevent harmful contact with other internal parts
and from hanging down into sight once the car is
reassembled and operating.
6
Bombardier Passenger Set
Light Housing
Marker Lights
Ditch Lights
Advertisement
