Flight Sensitivity Adjustment; Trim Adjustments - sky viper m200 Nano Drone Instruction Manual

FLIGHT SENSITIVITY ADJUSTMENT

Drone responsiveness may be adjusted on the Controller
to match your flying skills.
There are two choices:
1- LOW SENSITIVITY
It is best to start in the LOW SENSITIVITY position
until you have mastered flying.
Flight sensitivity can be adjusted before or during flight.

TRIM ADJUSTMENTS

1
2
3
4
5
6
7
2– HIGH SENSITIVITY
If Drone drifts in any direction while hovering (and you are not pressing the
Direction stick), you may need to make trim adjustments. Safely land Drone
on a level surface. Press the recommended Trim button as described below.
(Remark - When the remote LED flashes 3 times quickly, the trim just goes
back to the middle of trim range). You still need to trim it as described if
you find drone drift. Launch Drone back into the air and attempt another
still hover. If Drone continues to drift, repeat the process until a still hover
is achieved:
Drone drifts forward (Fig. 1)
– Press the B button
Drone drifts backward (Fig. 2)
– Press the F button
Drone drifts to the left (Fig. 3)
– Press the R button
Drone drifts to the right (Fig. 4)
– Press the L button
Drone spins counter-clockwise, when viewed from the top (Fig. 5)
button
– Press the
Drone spins clockwise, when viewed from the top (Fig. 6)
button
– Press the
HIGH
LOW
OFF
OFF
2
1