Troubleshooting - sky viper m200 Nano Drone Instruction Manual

Hide thumbs Also See for m200 Nano Drone:
Table of Contents

Advertisement

TROUBLESHOOTING

PROBLEM
Drone is unresponsive or
behaving erratically
All blades spin, but Drone
will not fly properly
Drone drifts in any
direction during flight
without direction from the
remote
Drone crashes
immediately
Drone crashes when
attempting stunt functions
www.skyrockettoys.com/products/sky-viper
Customer Service :
888-674-5650
©2015 Skyrocket Toys LLC, Los Angeles, CA 90066 USA. All Rights Reserved.
Sky Viper is a registered tradmark and the Skyrocket logo are trademarks of Skyrocket Toys LLC.
SOLUTION
Drone may be miscalibrated by launching from an unlevel
surface. Turn the remote off. Turn off the Drone for 30
seconds, then turn them back on and try again from a flat,
level launching surface.
Ensure your remote is within unobstructed view of Drone and
you are within 30 feet range.
Ensure the remote has fresh batteries and the LiPo battery
is fully charged.
Inspect Drone for any possible damage. Turn the remote off
and turn off the Drone for 30 seconds then turn them back
on and try again from a flat, level launching surface.
Drone's blade may have been installed incorrectly. Reinstall
and remember that the GREEN blades point forward.
Adjust the trim controls until drifting ceases, see page 7.
Propellers may be installed in the wrong position. Ensure
proper installation.
Ensure that Drone is flying a minimum distance of 6 feet
from the ground with a minimum 6 feet clearance in all
directions.
MADE IN CHINA.
#skyviper
#skyviper

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents